Q-See QC40198 - Manual (Page 97)

WEB OPERATION
QC40198 User Manual
88 | P a g e
Please refer to the following chart for detailed information.
Parameter Function
System
Time
Here you can change system time. Please click Save button after
your completed changing
Sync PC You can click this button to save your PC current time as the system
time
Data
Format
Here you can select data format from the dropdown list.
Data
Separator
Please select separator such as – or /.
Time
Format
There are two options: 24-H and 12-H.
DST Here you can set daylight saving time, begin time and end time. See
Figure 7-24 and Figure 7-25.
Language You can select the language from the dropdown list. Device needs to
reboot to activate the change.
HDD Full
There are two options: stop recording or overwrite the previous files
when HDD is full.
When current working HDD is full, system stops recording.
When current working HDD is full, system starts to overwrite the
oldest files.
Pack
Duration
Here you can select file size. The value ranges from 1 to 120.Default
setup is 60 minutes.
Device No
When you are using one remote control to manage multiple devices,
you can give serial numbers to the devices.
Click the address button in the remote control and then input the
corresponding number to control the combo DVR.
Video
Standard There are two options: PAL/NTSC.
Please note, for the Web user, this information is for reference only.
You can not change.