Remotec ZXT-310 V1.2 - Manual (Page 24)

24
z Z‐Wave Extender TM
IR port output
z
Z‐Wave wall switch / dimmer
Multi-Channel Device
End Point 2 Multi-Channel Device
End Point 1
z Z‐Wave power strip
Multi-Channel Device
End Point 1
Multi-Channel Device
End Point 4
Please refer to the target device user manual for more
information such as Inclusion / Exclusion and add End Point to a
Scene / Group.
Q How to select my AV equipment IR code from ZXT‐310?
A You should refer to the code list and look into the Device + Brand
and try the code no. sequentially until you find the right code. You
can record down your device code under the table for future
reference after setting up the ZXT‐310 correctly.
Q ZXT‐310 supports external IR emitters, but there is no response
on the IR emitter socket, why?
A You should make sure your selected IR port output is same as
your configuration; please refer to “IR Port Mapping” section.