Danby DAC7037M User Manual

Page 7

Advertising
background image

6

1. Assembly of the Upper Channel, to

Cabinet.

"L" Shaped Top Channel: Install the "L"

shaped channel to the top of the cabinet as

shown in Fig.3 using four(4)3/8"(10mm)screws.

2. Assembly of the Side Curtains to

Cabinet.

Extend the shutter from the shutter frame and

slide it into the shutter tabs on the side channel

of the air conditioner as shown in Fig. 4.

Slide the shutters into the top (“L” Shaped) and

bottom (“U” Shaped channels. The shutters are

identified (on frame) as left & right.

3.

Completing the Installation

Cut the

foam (non adhesive) sealing strip to

fit the area of the window sill that the air

conditioner will rest on.

3a.

Completing the Installation (cont’d)

• Carefully place the air conditioner into the

window with the

“L” shaped mounting bracket

(on top) positioned in front of the upper window

sash. The bottom of the cabinet should be

positioned on the “recessed” portion of the

window frame. Pull the window down until it

rests just behind the front flange of the (top)

“L”

shaped mounting bracket. See Fig. 5.

Expand the shutter frames (fully) on each side

and secure the top of the frames to the window

sash using one 3/4"(19mm)screw on each side

and one

in the “L” shaped mounting bracket.

See Fig. 5

Secure the shutter clamp on each side of the

(lower) shutter and secure to window sill using

one 3/4"(19mm)screw on each side. Fig.5

Place the second

foam sealing strip to fit the

opening between the inside and outside windows

then attach the safety lock to the outside window

frame using one 3/4”(19mm) scre w. See Fig. 6.

PLEASE NOTE: Window applications come in a

variety of different styles. Therefore, it may be

necessary to modify or improvise your particular

installation.

3/8"(10mm) Screw

“L” Shaped

Mounting Bracket

Fig. 3

“U” Shaped Channel

(Factory Installed)

Fig. 5

“L” Shaped

Mounting

Bracket

Window Sash

Fig. 6

Foam Seal

Shutter clamps

Safety Lock

3/4"(19mm) Screws

3/4"(19mm) Screw

Shutter Frame

Shutter

Fig. 4

Shutter Tabs

s

b

at

ot

ni

n

w

o

d

e

di

lS

Advertising