DirecTV HD65W20 - Manual (Page 13)

Setup and Connections
Chapter 1 9
Jacks and Cables
Below is a description of the jacks and cables you can use to make connections. Note
that not all cables come with your television unit.
S-Video Jack and Cable
The S-Video jack provides the best picture quality for your system.
This jack is available on this TV and is used in conjunction with audio cables.
Remember also to connect the left and right audio cables because the S-Video jack
carries only the picture signal, not the sound.
Audio/Video Jacks and Cables (RCA-type)
The audio/video jacks provide very good picture and stereo sound quality.
Theses jacks are used for most audio/video connections between components. The
audio/video jacks are often color coded (yellow for video, red for right audio, and
white for left audio). If your component has only one input for audio (mono),
connect it to the left (white L/Mono) audio jack on the TV.
RF Jacks and Coaxial Cables (F-type)
RF jacks are necessary for reception of off-air broadcasts, cable, and DIRECTV signals.
These jacks are required for antenna or cable connections. The RF and coaxial jacks
on the TV are labeled SATELLITE IN, ANTENNA A IN, and ANTENNA B IN. An RG-6
coaxial cable is required for all satellite signal distribution.
Optical Jack and Cables
The optical cable is used for connecting a Dolby Digital receiver. If you own a
Dolby Digital receiver that uses an optical cable-type input, you can use an optical
cable to connect the TV to that receiver for the best sound quality.
Telephone Jack and Cord
The telephone line cord is required to connect your TV to a phone line. If you choose
to subscribe to DIRECTV
® programming, a phone line dedicated and continuously
connected to the digital satellite receiver is required. The phone line connection is
used to periodically call out to DIRECTV. You will need an RJ11 type modular jack,
which is the most common type of phone jack and might look like the one pictured
here. If you don’t have a modular jack, call your local telephone company to find out
how to get one installed.
Y, P
B,
P
R
Jacks and Cable
The Y, P
B
, P
R
jacks allows you to connect an optional component video source, such
as a DVD player. This connection provides optimum quality by maintaining the
video source as three separate signals through these jacks. To ensure maximum
picture quality, use three video-grade cables for the connection.
S-Video Jack
Audio/Video Jacks
RF Jack
Digital Audio
Out Jack
Phone Jacks
Y PB PR