Vinpower Digital HDDShark - Manual (Page 19)

16
 Update: This function will perform firmware-update with the firmware-update
hard drive that contains the firmware update file.
General Firmware Update Procedure:
a. Pre-format a SATA Hard Drive using “Format Update HDD” function.
b.
Copy the manufacture certified update file onto such pre-formatted hard
drive via a PC/Mac.
c. Insert such hard drive into the Source Port of the system.
d.
Execute the “Update” function.
e. Restart the system when asked to do so.
It is strongly suggested that an upgrade to the system’s firmware not be
performed, unless the system is getting unstable and instructed to do so by a
technician.
8)
Save
This function will save all the settings modified since the last time the system was
booted-up.
7. Manage Accounts
This menu will allow the Administrator to perform the following user administrative tasks.
This feature is disabled by default. Prior to activating this feature, the duplicator
recognizes all users as the only activated user defined as the administrator. The pre-
defined password for this menu is “0000”.
1) View User
This menu allows for the viewing of the existing user accounts.
2) Create User
This menu allows for the creation of additional user accounts. Each user has
individual settings. During this process, there are prompts to enter a new user
name (up to 8 alphanumeric letters or numbers) and user password (consisting
of a 4-digit number) for a new account.
3)
Delete User
This menu allows for the deletion of an existing user account. During this
process, there is a prompt to select the existing account to be removed.
*User “Admin” is the administrative account; this account CANNOT be deleted.
4) Password on Bootup
This menu allows for the enabling/disabling pf the user administrative feature
prompt; user login upon boot up.
8. Shutdown
This function saves any system settings that have be modified since powering on the
system, to makes sure it is safe to turn off the system without any loss of settings. Once
the Ready to Power OFF message appears, then the system can be safely turned off via
the machine Power Switch. Turning off the system without performing this function will
increase the risk of damaging the system.