Configuration procedure, Displaying and maintaining ipsec – H3C Technologies H3C SecPath F1000-E User Manual
Page 204
192
•
Apply the IPsec policies or IPsec profiles to the uplink interfaces on the two devices. If you change
the virtual IP address after applying the IPsec policy to an interface, be sure to re-apply the IPsec
policy to the interface.
Configuration procedure
To implement IPsec stateful failover on two devices, you must make sure that IPsec stateful failover is
enabled on both devices.
To enable IPsec stateful failover on a device:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable IPsec stateful
failover.
ipsec synchronization enable
Optional.
By default, IPsec stateful
failover is enabled.
Displaying and maintaining IPsec
Task Command
Remarks
Display IPsec policy
information.
display ipsec policy [ brief | name policy-name
[ seq-number ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view
Display IPsec policy
template information.
display ipsec policy-template [ brief | name template-name
[ seq-number ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view
Display the configuration
of IPsec profiles.
display ipsec profile [ name profile-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display IPsec proposal
information.
display ipsec proposal [ proposal-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display IPsec SA
information.
display ipsec sa [ brief | policy policy-name [ seq-number ]
| remote ip-address ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view
Display IPsec packet
statistics.
display ipsec statistics [ tunnel-id integer ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display IPsec tunnel
information.
display ipsec tunnel [ | { begin | exclude | include }
regular-expression ]
Available in any
view
Clear SAs.
reset ipsec sa [ parameters dest-address protocol spi |
policy policy-name [ seq-number ] | remote ip-address ]
Available in user
view
Clear IPsec statistics.
reset ipsec statistics
Available in user
view