H3C Technologies H3C SecPath F1000-E - Manual (Page 358)

346
Figure 221 Desktop sharing services
Figure 222 Adding a desktop sharing service resource
Table 34 Configuration items
Item Description
Resource Name
Enter a name for the desktop sharing service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command, H3C recommends including the
resource type, local address, and local port in the resource name so that users can view
the desired information after they log in to the SSL VPN system.
Remote Host
Specify the host name or IP address of the remote host that provides the desktop sharing
service.
Remote Port Specify the port number that the remote host uses for the desktop sharing service.
Local Host Specify a loopback address or a character string that represents a loopback address.
Local Port
Specify the port number that the local host uses for the remote access service. H3C
recommends using a port number greater than 1024 that is rarely used.
Command
Configure the Windows command for the resource.
For example, you can configure the command for a Windows desktop sharing service
in the format mstsc /v <local address> <local port>, such as mstsc /v 127.0.0.2
20000. If you specified the default port number of the desktop sharing service as the
local port number, you can omit the local port in the command.