Linkskey LKV-9208IP - Manual (Page 24)

Prima IP User Guide Rev. 1.6
https://<IP_address>:<PortBase+8>.
For example, if the IP address is 192.168.1.210 and the port base number is 5970,
then you should enter
https://192.168.1.210:5978
Remember that it’s a secure SSL encrypted connection, so you should type “https” instead of the
usual “http”. Otherwise, the connection will not be established.
If you are satisfied with the default port base setting as 5900, you can leave the port base unmodified.
The default port base for Prima IP connection is set at 5900. This means it will use
port 5900 (port base) for viewer connection and port 5908 (port base + 8) for https
web browser connection.
<Port base> – used for viewer connection
<Port base + 8> – used for secure browser connection
However, if you intend to use your own port base setting, just access the Web
Management interface and configure the port base.
For example, if you choose 5970 as your port base, then you have:
5970 – used for viewer connection
5978 – used for secure browser connection
Click Submit button and Apply Settings button to validate your new setting.
Now you have installed Prima IP within your Local Area Network environment, and
can try to establish a remote viewer connection…
- 20 -