Linkskey LKV-9208IP - Manual (Page 90)

Prima IP User Guide Rev. 1.6
4.17 Users/Radius Accounting – Configure
The Setting For The Radius Accounting
Server
Normally, RADIUS accounting is disabled by default. However, if you have RADIUS
accounting enabled on a RADIUS server or LDAP server, you can check the option of
RADIUS Accounting and subsequently configure its relevant settings to take
advantage of this feature.
After you have made all modifications, click Store Settings to save your settings and
then hit Apply Settings / Restart Servers to validate these new settings. Every change
you have made on this page will NOT apply until you hit Apply Settings / Restart
Servers!
Enable RADIUS Accounting : Check this option, if you want to enable RADIUS
accounting support on Prima IP.
Accounting Server : Here you should enter the IP address of the server that offers
RADIUS accounting service.
- 86 -