Powerfix 103749-14-01A - Manual (Page 8)

8 GB/IE
J Check that all parts have been assembled correctly. Improper assembly may result in
injury.
Safety instructions for lashing straps
J Always check the lashing strap for damage before using it. On no account use the
lashing strap if the strap is damaged.
J Carefully check dirty straps or straps that have been contaminated with corrosive or
other materials that may damage them. You may have to ask the manufacturer to
check them.
J Have the lashing straps and all components checked by an expert at least once a
year. In accordance with the conditions of use and the operational circumstances,
further checks by a professional may be necessary from time to time.
J On no account use the lashing strap if:
- there are broken threads or cuts in the thread, especially if the edges have been
nicked or there are other alarming cases of damage
- the labelling is missing or is no longer legible
- there is damage to the connections, or deformation due to exposure to heat
(friction, radiation)
- there is damage due to the effect of corrosive substances.
J On no account use the ratchets if:
- there are incipient tears, breakages or considerable cases of or damage from
corrosion
- there is widening > 5 % (5 % in the hook mouth or general deformation)
- there is visibly permanent deformation of load-bearing parts
J Repairs to the lashing straps may only be carried out if the information regarding
the manufacturer, material and maximum permissible tensile load is clearly
designated on the label. They may only be carried out by the manufacturer or a
person specified by him. Following repair, the manufacturer or the person
designated by the manufacturer must ensure that the maximum permissible tensile
load of the lashing straps as originally specified on the label is maintained.