Operating procedure – Qlima DD108 User Manual
Page 3
WARNING:
DO NOT adjust the OSCILLATION LOUVER by hand, as this will cause
damage.
5. ENERGY SAVING
This setting button offers you “Energy-Saving” function. It means increase the humidity
setting level around RH 15%.
When you initially turn on the unit by main power, the LED indicator is off. Press this
button, the green LED will on and this will offer you energy-saving function.
Restart the unit will be on previous setting.
6. FULL TANK – FULL TANK INDICATOR
The indicator will flash and the alarm will sound when the water tank is full. Please empty
the water tank and replace it to the proper position, then the unit will running at previous
setting.
OPERATING PROCEDURE
1. Press the “ON/OFF” button to turn on the unit. Press again to turn off the unit.
WARNING:
z
Once you turn off the unit, the oscillation louver will swing back to the level. The fan will
keep running about 2 minutes to release heat.
z
DO NOT unplug from the mains till the fan is off.
2. Press the MODE control to select the desired performance.
3. Press AUTO SWING to control the air delivered direction.
4. Set the TIMER, if required.
5. Press ION to get fresh air, if required.