Eizo Flexscan S2133 21.3" 4:3 IPS Monitor - Manual (Page 9)

9
Chapter1Introduction
●
Rear
14
12 10 11
13
16
15
10. Power connector Connectsthepowercord.
11. Input signal connector
Left:DisplayPortconnector/Center:DVI-Dconnector/Right:D-Submini15-pin
connector
12. USB port (UP) ConnectstheUSBcableforusingtheUSBHubfunction( page37 ).
13. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
14. Stand *2 Adjuststheheightandangle(tiltandswivel)ofthemonitor.
15. USB port (DOWN) ConnectsaperipheralUSBdevice.
16. Cable holder Coversthemonitorcables.
*2 An optional arm (or an optional stand) can be attached by removing the stand (see “6-1. Attaching the Optional Arm” (page 35) ).
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents
and the overview of the software programs.
●
Disk contents and software overview
The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt file on the disk
for software startup procedures or file access procedures.
Item Overview Windows Macintosh
Screenadjustmentpatternfiles Usedwhenadjustingtheimageofanalog
signalinputmanually.
√ √
ScreenManagerProforLCD
(DDC/CI) Softwareforadjustingthescreenusingthe
mouseandkeyboard.
√ -
EIZOScreenSlicer Softwarethatdividesascreenandlaysout
multiplewindowsefficiently.
√ -
User’sManualofthismonitor(PDFfile) √ √
Readme.txtfile √ √
●
To use “ScreenManager Pro for LCD (DDC/CI) / EIZO ScreenSlicer”
For the installation and use of “ScreenManager Pro for LCD (DDC/CI) / EIZO SceenSlicer”, refer to the
respective User’s Manual on the disk.