Godox AD600B Witstro TTL All-In-One Outdoor Flash - Manual (Page 13)

Optical
2.4G
Optical
2.4G
Optical
2.4G
- 47 - - 48 -
If there is a problem, refer to this Troubleshooting Guide.
The flash exposure is underexposed or overexposed.
● There was a highly reflective object (e.g. glass window) in the picture.
→ Use FE lock (FEL).
● You used high-speed sync.
→ With high-speed sync, the effective flash range will be shorter. Make sure the subject is within the effective flash
range displayed.
● You used Manual Flash mode.
→ Set the flash mode to TTL or modify the flash output.
This flash supports firmware upgrade through the USB port. Update information will be released on our
official website.
USB connection line is not included in this product. The USB port is a standard Micro USB socket. Common
USB connection line is applicable.
Troubleshooting
● Shut down the device immediately should abnormal operation be detected.
● Avoid sudden impacts and the product should be dedusted regularly.
● It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary.
● Maintenance of the flash must be performed by our authorized maintenance department which can provide original
accessories.
● This product, except consumables e.g. flash tube, is supported with a one-year warranty.
● Unauthorized service will void the warranty.
● If the product had failures or was wetted, do not use it until it is repaired by professionals.
● Changes made to the specifications or designs may not be reflected in this manual.
Maintenance
Firmware Upgrade
Technical Data
Model
Wireless Slave Unit Mode
Flash Mode
Compatible Cameras under
Radio Transmission (as slave unit)
Guide No. (m ISO 100)
Flash Duration
POWER
Power Output
Stroboscopic Flash
Flash Exposure Compensation (FEC)
Sync mode
Delay Flash
Mask
Fan
Beeper
Modeling Lamp (LED)
Optical Slave Flash
Flash Duration Indication
Display
• Wireless Flash (optical transmission and 2.4G transmission)
Wireless Flash Function
Controllable Slave
Groups
Transmission Range
(approx.)
Channels
• Power Supply
Power Supply
Full Power Flashes
Recycle Time
Battery Indicator
Power Indication
• Sync Triggering Mode
• Color Temperature
• Dimensions
Dimension (with battery)
Net Weight (with battery)
AD600B
Radio transmission mode (compatible with Nikon & Canon)
Optical transmission mode (compatible with Nikon & Canon)
Wireless off
Slave unit of radio transmission
Slave unit of optical transmission
87 (m ISO 100, with AD-R7 standard reflector)
1/220 to 1/10000 seconds (T0.1)
600W
9 steps: 1/256~1/1
Provided (up to 100 times, 100Hz)
Manual. Feb: ±3 stops in 1/3 stop increments.
0.01~30 Seconds
√
√
√
10W
S1/S2
√
Dot-matrix panel
Slave, Off
3 (A, B, C)
5 (A, B, C, D, E)
Indoors: 12 to 15 m / 39.4 to 49.2 ft.
Outdoors: 8 to 10 m / 26.2 to 32.8 ft.
80m
4 (1, 2, 3, and 4)
32 (1~32)
Lithium battery pack (11.1V/8700mAh)
500
Approx. 0.01-2.5s
√
Power off automatically after approx. 60 minutes of idle operation.
3.5mm sync line, wireless control port
5600±200k
220x245x125 mm (flash tube & reflector not included)
2.69 Kg (flash tube & reflector not included)
Nikon cameras, supporting i-TTL/M/RPT flash (X1N as master unit, etc.)
Canon EOS cameras, supporting E-TTL II/M/RPT flash (X1C as master unit, etc.)
M/Multi
TTL/M/Multi
TTL/M/Multi
High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync