Impact VC-500WLN-II 500Ws Digital Monolight - Manual (Page 18)

18
Setting a Group
Groups are effective for independently adjusting
selected lights in a multi-flash setup. Setting lights
to groups let you set brightness of key, fill, and hair
lights individually.
• Press the Slave button repeatedly until the group
selection screen appears.
• Use the or buttons to select a group.
• Press and hold the Slave button for 4 seconds to return to the main screen.
Other Functions and Protective Features
Audio Button
When the audio icon is onscreen, the monolight will emit a beep to indicate that
the capacitors have recharged. To turn this function off, press the audio button.
The icon will turn off. Press the audio button again to reactivate the function.
Note: When the audio function is disabled, the modeling light will act as a
recycle indiactor. When the flash is fired, the modeling light will turn off until the
capacitors have recharged, and then turn on again.