Impact VC-500WLN-II 500Ws Digital Monolight - Manual (Page 21)

21
Turn off the modeling light by pressing and holding the button for three
seconds.
Channels
This studio flash has a multichannel radio receiver,
which can be triggered using the included
transmitter. To adjust the channel settings on the
remote, first remove the battery compartment door.
Set the device to your required channel, using the
chart below as a guide.
Note: White represents the DIP switch button.
Note: The channel setting on the monolight and the transmitter must match
in order to wirelessly trigger the flash, adjust flash power, and turn on/off the
modeling lamp.
1
1
2 3 4 1
2
2 3 4 1
3
2 3 4 1
4
2 3 4 1
5
2 3 4
1
6
2 3 4 1
7
2 3 4 1
8
2 3 4 1
9
2 3 4 1
10
2 3 4
1
11
2 3 4 1
12
2 3 4 1
13
2 3 4 1
14
2 3 4 1
15
2 3 4