Angler Silverbox Softbox (18") User Manual
Page 7
Advertising
5
6
7
8
5. Fold the flaps of the softbox shell over the
speed ring and press down on the touch
fasteners to close the back of the softbox. If
you’re using a hot light (quartz, tungsten, HMI,
etc.), make sure to open the four vents on the
sides of the softbox.
6. If you are using the internal baffle, attach it to
the interior now, using the straps with snaps
that are built into the softbox.
7. Attach the front diffuser to the front of the
softbox using the touch fastener, making sure
the diffuser is in contact with the softbox all the
way around its perimeter so no direct light can
escape.
8. With your light unit’s power off, mount the
speed ring to the light unit according to its
manufacturer’s instructions.
7
Advertising