Angler Silverbox Softbox (18") - Manual (Page 9)

Disassembling the softbox
1. Turn off the power to your light head and disconnect the power cord from the power
supply.
2. Allow time for the light unit, flex rods and speed ring to cool off before proceeding.
3. Unmount the softbox assembly from the light head.
4. Pull the flex rods out of the speed ring using the same opposite rod pattern used
in assembly.
5. You can leave the flex rods, inner baffle and front diffuser in place if you wish. The
softbox will roll up for storage with its diffuser and inner baffle in place.
SPECIFICATIONS
Dimensions (H × W × D)
18” Ч 18” Ч 12” (46 Ч 46 Ч
30 cm)
Shape Octagonal
Design type Deep parabolic
Compatibility
Strobes, fluorescent,
LED lights.
Weight 1.75 lb. (0.8 kg)
Removable front diffuser Yes
Removable interior baffle Yes
Accepts grids Yes
Requires speed ring Yes
9