Saramonic Noise-Canceling Wireless Over-Ear Headphones - Manual (Page 9)

1. Please make sure the SR-BH600 is connected with the
first device successfully.
2. Disconnect the bluetooth connection of the 1st device,
the SR-BH600 will enter pairing mode automatically.
3. Pair and connect SR-BH600 with the second device.
4. Find SR-BH600 in the bluetooth list of the first device and
connect again to connect two devices simultaneously.
Connect an Additional Bluetooth Devices
Charge the headphones
Indicator & Voice Prompts Status
Red indicator flashing with"Dudu" Low battery
Solid red Charging
Indicator off Fully charged