Angler CatchLight Reflector V2 (24 x 58.5") - Manual (Page 4)

4
Assembling the CatchLight
1. Assemble the two tubes by fitting
the pieces together. Make sure the
locking buttons fit through the holes
so the pieces are locked together.
2. Thread the tubes through the
sleeves on the top and bottom of the
reflector.
3. Thread one rod through the sleeve
at the end of the CatchLight, and
secure it to the tubes with the knobs.
4. At the zippered end, fold the fabric
and zip up the zipper about ¼ of the
way. Then thread the rod through the
zipped portion of the CatchLight and
secure it with the knobs.
5. Pull the reflector tight and zip it
closed.
3
1
2
4
5