Angler CatchLight Reflector V2 (24 x 58.5") - Manual (Page 5)

5
6. Attach the bracket to the back of
the CatchLight assembly by fitting
the bracket’s bolts through the
holes at the center of each tube,
and securing them with the knobs.
At this point, the CatchLight is
assembled, the reflector will be
taut.
7. Loosen the bracket’s locking knob,
and place it on the light stand’s 5/8-
inch stud. Tighten the locking knob
until secure.
8. Adjust the swivel bracket to the
desired angle.
An optional reversible white/soft gold
fabric is available separately. Attach it to
the CatchLight with the touch-connect
strips around the edges of the fabric and
CatchLight.
7
6
8