Recording, Using this unit as a power amplifier, P. 62) – Marantz MODEL 40n Stereo 140W Integrated Amplifier (Black) User Manual
Page 62
Recording
Audio signals input into this unit can be output to an external recording
device. When recording audio from a playback device connected to this
unit, audio can be recorded with the playback device still connected to this
unit.
1
Press AMP
X
to turn on.
2
Press the input source select button to switch to the
input source from which you want to record.
The selected input source is displayed on the display.
3
Recording starts.
0
For information on operations, see the owner’s manual of the
recording device.
Using this unit as a power amplifier
When connecting a pre-amplifier and using this unit as a power amplifier,
switch the input source of this unit to “PWR AMP”.
1
Turn the INPUT selector on the main unit to switch the
input source to “PWR AMP”.
“PWR AMP” is displayed on the display.
0
When the input source is “PWR AMP”, adjustment of the volume, balance and
tone has no effect. Adjust these adjustments on the pre-amplifier.
NOTE
0
When the input source is “PWR AMP”, the main unit outputs at maximum volume.
Check the output level on the input device before playing it and adjust the volume
accordingly.
0
If the input source is set to “PWR AMP”, the network function of this device
becomes disabled. When you switch to another input source from “PWR AMP”,
this device is restarted, and the network function is enabled.
0
If the input source is set to “PWR AMP”, the “Auto-Play” function of this unit
62