Denon DN-500CB CD/USB/Bluetooth Player with Remote - Manual (Page 13)

13
Other Information
USB Devices
When playing audio files on a USB device, note the following:
•
DN-500CB does not support USB hubs or USB extension cables.
•
DN-500CB supports USB devices that are mass storage class or compatible with MTP.
•
DN-500CB supports FAT16 or FAT32 file systems only.
• You can have up to 999 folders and up to 8 folder levels, including the root directory.
•
You can have up to 999 audio files. If the USB device contains more than 1000 files, some audio files may not
play or appear correctly.
• File names, folder names, and text characters can use up to 255 characters. Only uppercase letters, lowercase
letters, numbers, and symbols can be displayed. Japanese file names will not be shown. File names that begin
with a “
. ” will not be shown.
• Copyright-protected files might not play properly and/or may appear as Unknown File .
When playing audio files on a USB device, DN-500CB supports the following tag data:
•
ID3 tags: Version 1.x and 2.x
•
M4A (without DRM protection)
•
MP2
•
for MP3 files:
• Sample rate: 44.1 kHz
• Bit rate: 32 kbps to 320 kbps
• Format: MPEG1 Audio Layer 3
• File extension: .mp3
•
for WAV files:
• Sample rate: 44.1/48 kHz
• Bit rate: 16/24 bit
• File extension: .wav
•
WMA (without DRM protection)
Audio File Playback Order
When playing audio files stored within multiple folders, the playback order of each folder is automatically set when
the unit reads the media. The files in each folder will play in the same order in which they were added to the media.
(This order may appear differently on your computer and/or in your software than it does on the unit.)