Features – Denon DN-500CB CD/USB/Bluetooth Player with Remote User Manual
Page 4
4
Features
Front Panel
1.
Power Button:
Press this button to turn the unit on or off. Make sure the
AC In
is properly connected to a power
outlet. Do not turn the unit off during media playback—doing so could damage your media.
2.
Aux In:
Connect an optional device to this input using a 1/8” (3.5mm) TRS cable. See
Operation
>
Playing
Audio from an External Device
for more information.
3.
USB Port:
Connect a mass-storage-class USB device to this port to play audio files. You can also connect your
device's charging cable here to charge it.
4.
CD Slot:
Insert a CD into this slot. See
Operation
>
Playing Audio CDs
for more information.
5.
CD
/
AUX
/
USB/BT Button:
Press this to enter the Media Selection screen. See
Operation
>
Selecting Media
Playback Mode
for more information.
6.
Repeat Button:
In CD or USB Mode, press this button to cycle through Repeat Playback modes:
Repeat One
,
Repeat Folder, Repeat All
and
Repeat Off
. See
Operation
>
Playing Audio CDs
for more information.
Power-On Play Button:
Press and hold this button to turn Power-On Play on or off. See
Operation
>
Additional
Functions
>
Power-On Play
for more information.
Device Select:
When in Bluetooth mode,
press the
Device Sel.
button. The screen will show “BT Device List".
Use the
Jog Dial
to navigate through the list of Bluetooth devices. When you find one you want to pair to, select
it by pressing the
Jog Dial
.
7.
Random Button:
In CD or USB Mode, press this button to cycle through
Random Play Mode
,
Random
Folder Mode
and
Single Play Mode
(
).
Pairing:
When Bluetooth mode is selected, the device will automatically enter pairing mode. To disconnect from
a paired Bluetooth device, press and hold the Pairing button for 1.5 seconds. If you have set a custom Bluetooth
pairing password, it is required to input this password before pairing. If a custom password was not set, (factory
default: 0000) it is not required to input the password.
8.
Time Button:
In CD or USB Mode, press this button to switch the Time Mode in the
display
. See
Operation
>
Playing Audio CDs
for more information.
Folder:
When in USB mode,
hold this button to switch to Folder View.
Clear:
In Bluetooth mode,
press and hold the Clear button to remove all paired devices from the unit’s memory
(and also unpair from a currently paired device). After the devices have been cleared from the unit’s memory, to
connect again to the same device, go to your Bluetooth device and select “Unpair” or “Forget the Device”,
depending on the type of device that you have. You can then select DN-500CB from your list of Bluetooth
devices and connect.
9.
Text Button:
In CD or USB Mode, press this button to cycle through the track information on the display: file
(USB Mode only), title, album and artist.
Lock Button :
Press and hold this button to turn Panel Lock on and off. See
Operation
>
Additional Functions
>
Panel Lock
for more information.
10.
Eject Button:
Press this to eject the CD in the CD slot.
To force-eject a CD, power off the unit, then press and
hold the eject button while powering the unit back on. To exit force-eject mode, turn the unit off.
11.
Display:
This screen indicates the unit’s current operation. See
Display
for more information.
1
2
3
5 6 8
10
11
16
12 13 14 15
17
4 7
9