Steps on the camera (3), Establish a wi-fi connection, D wi-fi on] screen disconnect,exit – Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) User Manual
Page 377: Confirm set, Error details, The wi-fi connection to a computer is now complete
377
Steps on the Camera (3)
10
Establish a Wi-Fi connection.
z
Select
[OK]
.
[
D
Wi-Fi on] Screen
Disconnect,exit
z
Terminates the Wi-Fi connection.
Confirm set.
z
You can check the settings.
Error details
z
When a Wi-Fi connection error occurs,
you can check the details of the error.
The Wi-Fi connection to a computer is now complete.
z
Operate the camera using EOS Utility on the computer.
z
To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (
z
If the Wi-Fi connection is terminated while recording a movie with remote
shooting, the following will occur.
-
If the power switch is set to <
k
>, movie shooting will continue.
-
If the power switch is set to <
1
>, movie shooting will stop.
z
Operations using the camera are not possible after you use EOS Utility to
switch from still photo shooting mode to movie recording mode.
z
With a Wi-Fi connection to EOS Utility established, certain functions are
unavailable.
z
In remote shooting, the AF speed may become slower.
z
Depending on the communication status, image display or shutter release
timing may be delayed.
z
In Remote Live View shooting, the rate of image transmission is slower
compared to a connection via an interface cable. Therefore, moving subjects
cannot be displayed smoothly.