Canon EOS-1D X Mark II DSLR Camera (Body Only) - Manual (Page 372)

372
You can edit out the first and last scenes of a movie in approx. 1-sec.
increments.
1
On the movie playback screen,
select [
X ].
X The movie editing panel will be
displayed at the bottom of the screen.
2
Specify the part to be edited out.
Select either [ U ] (Cut beginning) or
[ V ] (Cut end), then press < 0 >.
Tilt < 9 > to the left or right to see the
previous or next frames. Holding
down the key will fast forward or fast
rewind the frames. Turn the <
5 > dial
for frame-by-frame playback.
After deciding which part to edit out,
press <
0 >. The portion highlighted
in white on the top of the screen is
what will remain.
3
Check the edited movie.
Select [ 7 ] and press < 0 > to play
back the edited movie.
To change the editing part, go back to
step 2.
To cancel the editing, press the
<
M > button, then select [ OK ] on
the confirmation dialog.
X
Editing a Movie’s First and Last Scenes