Adjusting power-saving features, Adjusting screen brightness, Customizing shooting information display – Canon PowerShot SX70 HS Digital Camera User Manual
Page 265: Configuring custom functions
z
Adjusting Power-Saving Features
z
To conserve battery power, you should normally choose [Power
saving] → [Display off] and [Auto power off] → [1 min.] or less.
z
The [Display off] setting is applied even if you set [Auto power off] to
[Disable].
z
[Display off] and [Auto power off] are not available when Eco mode is
set to [On].
z
Adjusting Screen Brightness
z
For maximum brightness (regardless of the [Disp. Brightness]
setting), press and hold the
button for at least one second from
the shooting screen or during single-image display. To restore the
original brightness, press and hold the
button again for at least
one second or restart the camera.
z
Customizing Shooting Information Display
z
To make the grid pattern smaller, choose
[Shooting info. disp.] →
[Grid display].
z
To switch from a brightness histogram to an RGB histogram or adjust
the display size, choose
[Shooting info. disp.] → [Histogram disp].
z
The electronic level is not displayed when [AF method] is set to
[
].
z
Configuring Custom Functions
z
To restore [Custom Functions (C.Fn)] defaults (except [Custom
Controls] settings), choose
[Reset camera] → [Other settings] →
[Custom function (C.Fn)] → [OK].
265