Elinchrom RQ RINGFLASH ECO 20492 - Manual (Page 6)

6
RQ Ringflash ECO Characteristics
Before You Start
• Up to 400 ws maximum flash power, for the Ranger Quadra RX Battery power pack.
• Detachable high quality flash cable for maximum power and flexibility, available in 1
m / 2 m standard / 5m / 10 m.
• Included reliable quality 2-pole flash tube with internal reflector and transparent
plastic protection.
• Included white diffuser cap to modify the light characteristics into a semi diffuse light
source.
• Included camera bracket to fit a wide range of cameras.
Ranger Quadra AS and the RQ Ringflash ECO are portable units, which will be frequently used
«on location». Please be aware of the danger, or inconvenience, which it may represent to
others for example children.
• Connect the flash cable with the security locking ring first to the RQ RF ECO and
than to the RQ power pack.
• Ensure that the RQ power pack is switched OFF.
• Only correct fitted flash cable connections are secured against arching, moister and
dust.
• Power pack outlets not in use must be protected with the security covers.
• Check all connections again; the cable must be locked with the security ring and
than switch on the unit.
• Now adjust / align the camera and start your lighting experience.
Attention
• Always switch off the unit before connecting or disconnecting the RQ Ringflash ECO!
• The ambient temperature whilst charging: min. 0°C (32°F) up to max. 40°C (104°F)
• The ambient temperature whilst the unit is in use: min. -20°C (-4°F) up to max.
40°C (104°F)
Third party manufacturers
Even, similar flashhead sockets and plugs are used by other manufacturers, the Ringflash
cannot be connected to generators from these manufacturers. Ask your Elinchrom service if
suitable adapter cords for those brands exist.
!