Elinchrom RQ RINGFLASH ECO 20492 - Manual (Page 9)

9
EN
Camera Positioning
1. Locking screw for vertical shift
2. Locking screw for horizontal shift
3. Screw 1/4“ for mounting the camera and for left - right shift
4. Thread 1/4“ and 3/8“ for mounting to a camera tripod
Positioning
The Ringflash can be mounted to a camera tripod by using one of the two threads [4],
respectively (1/4“ and 3/8“, respectively). The camera lens is to be led through the
opening of the ring flash and then correctly positioned and carefully fixed by using screw
[3]. Then re-mount the rail by screwing both screws [2]. The Ringflash unit can be
vertically and horizontally shifted within the slots for precise positioning of the camera by
using screws [1], [2] and [3], respectively.
1
4
2
3