IK Multimedia iLoud MTM Immersive Bundle High Resolution Compact Studio Monitors (11 Speakers, Black) - Manual (Page 22)

English
21
Microphone stand mounting
Thanks to the thread adapter on the bottom of the speaker, iLoud MTM can be mounted on any standard 3/8”
microphone stand. This allows you to place the speakers at the perfect height and, most important, helps to
reduce the typical reflections of the desktop (or shell) and, consequently, improves the frequency response/
linearity of the speaker.
DFU mode
To update the firmware of your iLoud MTM you need to enter in DFU mode. To update your iLoud MTM:
• connect your iLoud MTM to a computer with a USB cable;
• enter the DFU mode: to enter the DFU mode, keep pressed the SENS button while powering up the iLoud
MTM. While in DFU mode the front LED will start blinking white.
• Open the firmware updater application (available at www.ikmultimedia.com/iloudmtm) and follow the
displayed instructions.
• The iLoud MTM needs to be restarted. Power off the unit, wait for at least 20 seconds and then turn it on
again.
• The iLoud MTM is now updated.