Enterasys Networks BRIM-E6 - Manual (Page 31)

EPIM-F3 (SINGLE MODE FIBER OPTIC PORT)
BRIM-E6 USER’S GUIDE Page 27
(e.g., -29.5 dBm peak = -32.5 dBm average).
A.3 EPIM-F3 (SINGLE MODE FIBER OPTIC PORT)
Internal Transceiver: Cabletron Systems FOT-F3™
Fiber Optic Transceiver
Connector Type: ST fiber optic ports
Figure A-3. EPIM-F3
Note: Transmitter power is inversely proportional to temperature rise.
Use the Output Power Coefficient to calculate increased or decreased
power output for your operating environment. For example, typical
Parameter Typical Minimum Maximum
Transmitter Peak
Wave Length:
1300 nm 1270 nm 1330 nm
Spectral Width: 60 nm — 100 nm
Rise Time: 3.0 ns 2.7 ns 5.0 ns
Fall Time: 2.5 ns 2.2 ns 5.0 ns
Duty Cycle: 50.1% 49.6% 50.7%