Service record, System reference data – Heatcraft Refrigeration Products H-IM-72A User Manual
Page 36
36
SERVICE RECORD
A permanent data sheet should be prepared on each installation, with a copy for the owner and the original for the installing
contractor’s files. If another firm is to handle service and maintenance, additional copies should be prepared as necessary.
System Reference Data
The following information should be filled out and signed by the Refrigeration Installation Contractor.
Date System Installed:
_______________________
Date Started:
_______________________
Installer and Address:
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
Job Name / Location:
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________
Compressor Unit Model:
__________________________________________________________________
Compressor Unit Serial No.:
___________________________________________________________
Electrical :
_______________________
Phase: _______________________
Condenser Model:
_______________________
Serial No.: ________________________
Design SST: Group __________________ Group __________________ Group _________________
Compressor Model / Serial No.
__________________ /
__________________
Group: __________________
Compressor Model / Serial No.
__________________ /
__________________
Group: __________________
Compressor Model / Serial No.
__________________ /
__________________
Group: __________________
Compressor Model / Serial No.
__________________ /
__________________
Group: __________________
Compressor Model / Serial No.
__________________ /
__________________
Group: __________________
Compressor Model / Serial No.
__________________ /
__________________
Group: __________________
Evacuation: # Times __________________
Final Micron: __________________
System Suction P (Group ____): ________________________ System Discharge P: ________________________
System Suction P (Group ____): ________________________ System Discharge P: ________________________
System Suction P (Group ____): ________________________ System Discharge P: ________________________
Ambient: ________________________
Superheat at Compressors: __________________________________________________________________________
Since product improvement is a continuing effort at Heatcraft, we reserve the right to make changes in specifications without notice.