FUJITSU Image Scanner fi-4120C - Manual (Page 104)

88
HINT
• When scanning semi-transparent documents, set the density to light to
avoid bleed through.
• To prevent the rollers from becoming dirty, avoid scanning documents con-
taining large areas written or filled in pencil. If scanning of such documents
is unavoidable, clean the rollers frequently.
ATTENTION
• Carbonless paper contains chemical substances that may damage the
Pad ASSY or rollers (e.g. Pick roller) when documents are fed. Pay atten-
tion to the following:
Cleaning:
If pick errors occur frequently, clean the Pad ASSY and
Pick rollers.For details on cleaning the Pad ASSY and
Pick rollers, see "3.2 Cleaning the ADF" (page. 43).
Replacing parts: The service life of the Pad ASSY and Pick rollers is
sometimes shortened when scanning medium-grade
paper documents.
• When the manuscript of Wood containg paper is read, the life of a Pad
ASSY and a Pick roller may become short compared with the case where
the manuscript of Woodfree paper is read.
HINT
When using the ADF, the leading edge of all document sheets must be
evenly aligned. Make sure that curling at the leading edge is within the fol-
lowing tolerances:
More than 30mm
Feed direction
Read surface Top of the paper
Less than
3mm
More than 30mm
Feed direction
Read surface Top of the paper
Less than
5mm