FUJITSU Image Scanner fi-4120C - Manual (Page 61)

3.2 Cleaning the ADF
fi-4120C Image Scanner Operator’s Guide 45
DAIL
Y CARE
3
• Pick roller
Lightly clean the Pick rollers taking care not to scratch the roller surfaces and the Mylar
sheet. Take particular care in cleaning this roller as black debris on it advesely affects the
pickup performance.
• Feed roller
1) Open the ADF by pushing on the ADF button.
If you open the ADF cover when the indication of the Function No. display is "P"
or "0", the Feed rollers do not rotate even you perform the operation of step 2)
below. So open the ADF cover when the indication is not "P" or "0".
2) Simultaneously hold down the "Send to" and "Scan" buttons on the operator panel.
The Feed rollers start to rotate slowly.
For details on where the "Send to" and "Scan" buttons are located, refer to the
following illustration.
3) Hold a soft, dry cloth moistened with cleaning fluid against the surface of the rotat-
ing Feed rollers so that it lightly cleans the surface of the rollers. Take particular
care when cleaning these rollers as black debris matter on these rollers affects doc-
ument pick performance.
As a guideline, seven presses of the "Send to" and "Scan" buttons make the Feed
rollers to rotate one full turn.
Mylar sheet (Transparent)
Function No.
display
Function
Send to
Scan
LED
Power button