4 alarm text file settings, Alarm text file settings – FUJITSU ETERNUSmgr P2X0-0202-01EN User Manual

Page 26

Advertising
background image

Chapter 2 Setup
>

2.3 Setting Items

ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-

26

Copyright 2009 FUJITSU LIMITED

P2X0-0202-04ENZ0

Number of Days Alarm History Files are Kept

This parameter specifies how long the Alarm History files are kept. Setting the number of days to
"0" means that the files are not deleted.

[Default value]

7

[Parameter]

HTML_ALARMFILE_DAY (0-65535 days)

[Example]

To store seven full days worth of Alarm History files (current day is not included):

HTML_ALARMFILE_DAY=7

2.3.4

Alarm Text File Settings

Alarm text files are categorized into the following types:

Alarm Text Date Files

On any given day, each alarm history message issued for a target device is also added to
that day's alarm text date file. The alarm text date files use a stxgrYYYYMMDD.log naming
format (e.g. "stxgr20081201.log").

Alarm Text Fixed File

A copy of the most recent alarm text date file may also be given an arbitrary name.

Alarm Text Files Directory

Alarm text files are created when this parameter is set.
If only alarm text date files are required, specify an absolute path to the directory in which the
alarm text date files are to be created.
If an alarm text fixed file is also required, specify its name as an absolute path. The alarm text
data files will then be created in the same directory as the alarm text fixed file.

[Parameter]

HTML_ALARMFILE_NAME (up to 64 characters)

[Example]

Only alarm text date files are to be created in "/opt/FJSVgrmgr/txt_1/":

TEXT_ALARMFILE_NAME = /opt/FJSVgrmgr/txt_1/

For this parameter, if there is no need for any special setting, it is
recommended not to enter any value. This parameter is initially
commented out in the default setup file available after installation.

Advertising