FUJITSU 32 - Manual (Page 91)

84
<<Setting the Start button>> (* for fi-4990 / M4099D)
If the scanner being monitored has function keys (F1,F2,...), it is necessary to assign a
function key to the start button in advance.
If no function key has been assigned to the start button, a dialog box for determining whether to
set the start button is displayed when the dialog box is displayed after selecting [Option] on the
pop-up menu.
Selecting "Yes" displays a dialog box below.
(If "No" is selected, the function to start any application when the start button in this application
is pressed is disabled.)
Pressing the [OK] button after selecting one of function keys from F1 to F3 enables assigning a
function key to the start button. If the [Cancel] button is pressed, the function key is not
assigned to the start button.
(If the [Cancel] button is pressed, the function to start any application when the start button in
this application is pressed is disabled.)