FUJITSU BX900 S1 User Manual
Page 95
BX900 S1
Operating Manual
95
Hot-plug components
1
Status indicator (green/orange)
Lights up green: Power supply is supplied to the connection blade
Flashes orange: Connection blade error
Dark:
Power supply is not supplied to the connection blade
2
ID indicator (blue)
Lit:
ID LED was activated via the management blade
Dark:
Normal operation
3
Stacking port 1 (internal) (green)
Lit:
Stacking port 1 is available
Flashes green:
Stacking port 1 is active
Dark:
Stacking port 1 is not available
4
Stacking port 2 (external) (green)
Lit:
Stacking port 2 is available
Flashes green:
Stacking port 2 is active
Dark:
Stacking port 2 is not available
5
Stacking (green/orange)
Lights up
yellow:
Connection blade is stack master
Flashes yellow:
Connection blade cannot perform role of master
Lights up green: Connection blade is stack slave
Flashes green:
Master selection process is active
Dark:
Connection blade does not belong to a stack
A
HiGig/HiGig+ connection (CX4) for stacking, see
"Connection blade stacking" on
B
10-Gbit Ethernet ports for SFP+ modules for connecting fiber-optic or copper
cables (with two integrated status LEDs each)
6 (ERR) Error indicator (orange)
Dark:
No SFP+ transceiver error
Lit:
SFP+ transceiver error
Flashes:
SFP+ module not supported