Gateway E1400 - Manual (Page 90)

System power management 83
Adding a Suspend option to the Start menu
If it’s not already shown in the Start menu, you can add an option that puts
your system into Suspend:
To add a Suspend option to the Start menu:
1 Click Start , select Settings , then click Control Panel . The Control Panel
window opens.
2 Double-click Power . The Power Properties window opens.
3 On the Power tab, click Advanced . The Advanced Properties window
opens.
4 On the Advanced tab, check the option Show Suspend command on Start
menu .
5 Click OK.
After you have added the Suspend option to the Start menu, you can put your
system into suspend from a normal working state by clicking Start , then
clicking Suspend .
Important If your system is part of a Novell network, putting your
system in Suspend disconnects you from your network
connection. Reestablish your network connection when
you take your system out of Suspend.
05960.book Page 83 Monday, February 21, 2000 2:47 PM