GE 0150-0255C - Manual (Page 29)

0150-0255C 4-5 Kalatel VDR
Deleting a Timed Recording:
1. Using the Arrow buttons to navigate, highlight the ON/OFF parameter of the event you wish to
delete.
2. Press the Enter button to enter the Edit mode.
3. Use the Arrow buttons to select DEL from the menu.
4. Press the Enter button to confirm the selection and exit the Edit mode.
5. Use the Arrow buttons to navigate to [OK], then press the Enter button to remove the selection
and exit the menu.
4.4 Main Menu
→ Record Settings
Color/Mono
Normal Record Speed
Alarm Record Speed
Video Quality
Use this menu to specify:
•
Color or Monochrome recording.
•
The record speed during Normal recording.
•
The record speed when the unit detects an alarm condition.
•
The recorded picture quality.
o Main Menu
→ Record Settings → Color/Mono
Auto
Mono
This menu sets the recorded video to be in Color or Mono. If you select auto, (default), the
unit will auto detect color as before. If you select mono, it will force the recording into
monochrome. All recorded and looped video will be monochrome. Use the Arrow buttons
to select Auto or Mono.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
o Main Menu
→ Record Settings → Normal Record Speed
Normal Record Speed
Pictures Per Second
5p
Use the Arrow buttons to select the desired Normal Record Speed.
Normal Record Speeds:
NTSC: 60, 30, 20, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0.
PAL: 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0.
When the Normal Record Speed is set to 0.0, the unit will only record
while an alarm is active.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.