GE 0150-0255C - Manual (Page 44)

Kalatel VDR 5-6 0150-0255C
Message
The Password Was Not Changed!
[OK]
If the password in the Confirmation Box does not
match the password from the Password box, this
message will appear.
Press the Enter button to select [OK] and exit the
menu.
5.8 Advanced Menu
→ Firmware Upgrade
Use this menu to upgrade the VDR’s Firmware using a PC connected to the VDR’s Serial Port, the
upgrade file, and the WinFlash program. The following message screen will display when this
command is selected.
Warning! Do not power off unit
until the operation is done!
Firmware Upgrade
[OK] CANCEL
Use the Arrow buttons to select Cancel to exit this command or OK to proceed.