Focusing hood, Refer to, P.22 – Mamiya C330 User Manual

Page 24: Next, Close-up photography (cont.) 22

Advertising
background image

Mamiya C330S: Page 22

Close-up Photography (cont.)

22

When Using a 55mm or 65mm Lens:
When using a 55mm or 65mm lens, set the dial

(10)

to 80 and attach

the parallax correction plate for 55mm/65mm lenses to the focusing
hood.

How to Install the Parallax Correction Plate:
Remove the focusing hood from the camera and turn it inside out. Also
turn the correction plate inside out and insert its chamfered edge into
the two catches on the hood, then fit the correction plate while pulling
out the slide lock on the opposite side. When the slide lock is released,
the plate is secured.

The figures visible on the left side of the correction plate after
attaching the focusing hood to the camera reveal the exposure factor.
Observe the line on the right for correcting parallax. When the pointer
indicates 1.5, the upper portion of the first line will be cut off. In turn,
this becomes a correcting scale when the exposure factor is 2, 2.5 and
3.

<- Prev

|

Table of Contents

|

Next ->

file:///E|/c330s/page_22.html [22-10-2003 15:26:38]

Advertising
This manual is related to the following products: