Mercedes-Benz 2005 E 320 CDI - Manual (Page 49)

47
Getting started
Driving
Diesel engine:
̈ Make sure the gear selector lever is set
to P.
̈ Do not depress the accelerator.
̈ Turn the SmartKey in the starter switch
to position 2 (
୴ page 34).
The preglow indicator lamp q in the
instrument cluster comes on.
̈ As soon as the preglow indicator
lamp
q goes out, turn the SmartKey
in the starter switch to position 3
(
୴ page 34) and release it.
The engine starts automatically.
̈ Depress the brake pedal.
The selector lever lock is released.
Starting with KEYLESS-GO*
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
For information on turning off the engine
with KEYLESS-GO, see “Turning off with
KEYLESS-GO*” (
୴ page 57).
The SmartKey with KEYLESS-GO must be
located in the vehicle.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
Gasoline engine:
̈ Make sure the gear selector lever is set
to P.
̈ Depress the brake pedal during the
starting procedure. Do not depress ac-
celerator.
The selector lever lock is released.
̈ Press KEYLESS-GO start/stop
button 1 once.
The engine starts automatically if the
SmartKey with KEYLESS-GO is in the
vehicle.
Diesel engine:
̈ Make sure the gear selector lever is set
to P.
̈ Depress the brake pedal during the
starting procedure. Do not depress ac-
celerator.
The selector lever lock is released.
̈ Press KEYLESS-GO start/stop
button 1 once.
i
If the engine is at operating tempera-
ture, the preglow indicator lamp
q
may not stay on and you can start the
engine without preglowing.
୴୴