Marantz DLP PROJECTOR VP-12S2 - Manual (Page 10)

6
ENGLISH
Remote Controller
a
d
g
l
¡2
¡5
¡7
™1
¡1
¡6
s
h
k
¡0
¡3
¡4
¡9
¡8
™0
j
f
PROJECTOR
a POWER ON key (
☞
P.10)
Turn the projector on.
s STANDBY key (
☞
P.18)
Turn the projector off.
d 3 / 4 / 1 / 2 keys
Control the MENU cursor.
f ENTER key
Confirm "Reset All", "Reset Lamp Life", "New Lamp?".
g MENU key ( ☞
P.20)
Display the on-screen menu.
h COMPONENT key (
☞
P.15)
Select the COMPONENT VIDEO IN signal.
j S-VIDEO key (
☞
P.15)
Select the S-VIDEO IN signal.
k VIDEO key (
☞
P.15)
Select the VIDEO IN signal.
l RGB key (
☞
P.15)
Select the RGB IN signal.
¡0 THEATER key (
☞
P.27)
Select the Theater picture mode.
Theater mode is designed for high fidelity black appearance
and is good for movie pictures.
When the key is pressed, the mode toggles Theater 1,
Theater 2, Theater 3 and Theater Default.
¡1 STANDARD key (
☞
P.27)
Select the STANDARD picture mode.
Standard mode is good for normal pictures.
When the key is pressed, the mode toggles Standard 1,
Standard 2, Standard 3, and Standard Default.
¡2 DYNAMIC key (
☞
P.27)
Select the Dynamic picture mode.
Dynamic mode is good for visually dynamic pictures.
When the key is pressed, the mode toggles Dynamic 1,
Dynamic 2, Dynamic 3 and Dynamic Default.
¡3 INFO. key (
☞
P.27)
Turn the information menu on or off.
¡4 CINEMA key
Press to turn the CINEMA mode – auto 3-2 pull down mode –
on or off.
¡5 NORMAL key (
☞
P.15)
Select NORMAL mode from four aspect ratio modes.
¡6 FULL key (
☞
P.15)
Select FULL mode from four aspect ratio modes.
¡7 ZOOM key (
☞
P.15)
Select ZOOM mode from four aspect ratio modes.
¡8 THROUGH key ( ☞
P.15)
Select THROUGH mode from four aspect ratio modes.
¡9 AUX key (
☞
P.15)
Select the DVI-D IN signal.
™0 FOCUS key (
☞
P.11)
Display a focus pattern.
™1 V-MUTE key
Turn the picture into black. Press again to resume.