Marantz DLP PROJECTOR VP-12S2 - Manual (Page 24)

Refer to the on-screen menu for making various adjustments and settings. (
☞
P.19)
1. Press the MENU key. The MENU appears.
2. Use
3 / 4 / 1 / 2
keys to select a menu item.
3. Make adjustments in Picture Adjust, Setting, Display, Configuration, Trigger2, or Memory.
4. Press the MENU key to exit. The MENU disappears.
Adjust the picture to suit own preference by using the Picture Adjust feature.
❖
For a video signal input, the following adjustments can be made:
NOTE:
- You cannot adjust Tint in Component signal (YC B C R /YP B P R )
or PAL format signal.
- If User Memory is set to default, Picture Adjust cannot be
selected. To select Picture Adjust, set User Memory to
either 1 to 3.
See “Memory”. (
☞
P.27)
❖
Setting the Picture Adjust Menu
1. Use
1 / 2
key to adjust.
2. Use
3
key to go back to the menu item.
❖
Contrast
❖
Color Temp. (Temperature)
H : Make white color bluer.
M : Make white color less blue. This setting is approximately 6500 Kelvin.
L : Make white color redder.
Color Temp. Low Middle High
Contrast 50
2.
1.
2.
1.
Picture Adjust
2.
1, 4
1, 4 2.
Picture Adjust
Setting
Display
Config
Trigger 2
Memory Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu 50
44
64
6
0
0
Middle
Using On-Screen Menu
20
ENGLISH
Item
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp. (Color Temperature)
Adjustments
0 100
Weak Strong
0 63
Dark Bright
0 100
Light Deep
0 31
Soft Sharp
R50 G50
Purple Green
0 63
Weak Strong
L M H
Red Middle Blue