Wake on ring connector: jmdm1, Irda infrared module header: jir2 – Microstar MS-6547 (v1.X) ATX Mainboard G52-MA00514 User Manual
Page 28
Advertising
Chapter 2
2-16
Wake On Ring Connector: JMDM1
This connector allows you to connect to a modem card with Wake On
Ring function. The connector will power up the system when a signal is re-
ceived through the modem card.
IrDA Infrared Module Header: JIR2
This connector allows you to connect to IrDA Infrared modules. You
must configure the setting through the BIOS setup to use the IR function. The
JIR2 is compliant to Intel Front Panel I/O Connectivity Design Guide.
JMDM1
NC
MDM_WAKEUP
5VSB
1
NC
1
2
5
6
JIR2
Pin
Signal
1
NC
2
NC
3
VCC
4
GND
5
IRTX
6
IRRX
JIR2 Pin Definition
Kap2_6547v1.1.P65
05.02.02, 09:36
16
Advertising