Front panel connector: jfp1 or jfp2, Front panel i/o connectivity design guide, Hardware setup 2-17 – Microstar MS-6547 (v1.X) ATX Mainboard G52-MA00514 User Manual
Page 29
Hardware Setup
2-17
Front Panel Connector: JFP1 or JFP2
The mainboard provides one front panel connector for electrical connec-
tion to the front panel switches and LEDs. Users can choose either the JFP1 or
the JFP2 depending on their needs.The difference between JFP1 & JFP2 is that
JFP2 is compliant with Intel
®
Front Panel I/O Connectivity Design Guide.
JFP1
Power
Switch
Power
LED
Reset
Switch
HDD LED
+
Speaker
Buzzer
(short
pin)
10
11
1
8
JFP2
(Intel spec)
1
2
9
10
PIN
SIGNAL
DESCRIPTION
1
HD_LED_P
Hard disk LED pull-up
2
FP PWR/SLP
MSG LED pull-up
3
HD_LED_N
Hard disk active LED
4
FP PWR/SLP
MSG LED pull-up
5
RST_SW_N
Reset Switch low reference pull-down to GND
6
PWR_SW_P
Power Switch high reference pull-up
7
RST_SW_P
Reset Switch high reference pull-up
8
PWR_SW_N
Power Switch low reference pull-down to GND
9
RSVD_DNU
Reserved. Do not use.
JFP2 Pin Definition
Kap2_6547v1.1.P65
05.02.02, 09:36
17