M-S Cash Drawer 7193 - Manual (Page 80)

7193 Owner’s Guide Commands
May 1996
Set or Cancel Rotated Characters Clockwise
Rotates characters 90 degrees clockwise. It remains in effect until the printer is
reset or until a Clear Printer (10) or Rotated Print (1B 12) command is received. It
is valid only at the beginning of a line. It cannot be used with non-rotated print
on the same line. See “Summary of Rotated Printing” on the next page.
Hex Decimal ASCII Value of n Default
1B 56 n 27 86 n ESC V n 0 = Cancel
1 = Set 0
Set or Cancel Upside-Down Characters
Prints upside-down characters. It is valid only at the beginning of a line. The
character order is inverted in the buffer so text is readable. It cannot be used with
right-side up characters on the same line. The Rotated Print (1B 12) command
cancels this command. Only bit 0 is used. Bits 1-7 are not used. See “Summary of
Rotated Printing” on the next page.
Hex Decimal ASCII Value of n Default
1B 7B n 27 123 n ESC { n 0 = Cancel
1 = Set 0