Changing the default password, Caution – Motorola SBG940 User Manual
Page 36
Advertising
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
28
Changing the Default Password
To change the default password:
1
On the SBG940 Setup Program left panel, click Admin to display the ADMIN — basic page:
2
In the Old Password field, type the old password. The default password is “motorola” (this field is case
sensitive).
3
In the New Password field, type the new password (this field is case sensitive).
4
In the Verify Password field, type the new password again (this field is case sensitive).
5
Click Apply to apply your changes.
Caution!
To prevent unauthorized configuration, change the default password immediately when you first
configure the Motorola SURFboard Wireless Cable Modem Gateway.
Advertising