Configuring wep on the sbg940, Configuring wep on the, Sbg940 – Motorola SBG940 User Manual
Page 79: Caution
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
71
Configuring WEP on the SBG940
Use Wired Equivalent Privacy (
) only if you have wireless clients that do not support WPA.
To enable WEP and set the key on the SBG940:
1
On the SBG940 Setup Program left panel, click Wireless.
2
Click the SECURITY tab to display the Wireless > SECURITY — basic page:
3
In the Security Mode field, select WEP and click Apply.
4
In the WEP Passphrase field, type a passphrase containing from 8 to 31 ASCII characters. For privacy, your
passphrase displays as dots.
Caution!
If you use WEP encryption, you must configure the same WEP key on the SBG940
and
all wireless clients (stations). Never provide your WEP key or passphrase to anyone who is not
authorized to use your WLAN.