MRV Communications TERESCOPE TS800/155 - Manual (Page 62)

M R V C o m m u n i c a t i o n s , I n c . – I n s t a l l a t i o n M a n u a l
52
Unpacking Instructions for TereScope
The TereScope is shipped pre-assembled. See fig.C2
1. Unpack all the accessories.
2. .Before mounting, in order to make installation on the mounting
surface easier, the JMP-L must first be detached and connected to the
fixation surface.
To detach the JMP-L, screws ‘B’ should be loosened and screws ‘F1’ and ‘G1’
only should be removed, shown in Fig: C2, C3a and C3b. Do not remove the
‘G2’ screws !
KEEP IN SECURE PLACE ALL THE BOLTS AND SCREWS. YOU
WILL NEED THEM FOR THE INSTALLATION.
APPENDIX C
&
The packing box contains:
# 2 x TereScope Transceivers
mounted
# JITK-L : Installer tools kit
and screws
# CD manuals
# Flexible ducts x 2
# Flange x 2
Fig C.1: TereScope as is packed
Figure C2: Detach JMP-L from TS
G2 (x2)
G1
F1 (x2)
Figure C3ab and C3b: Screws to be removed G1 and F1
B