Playback cds, Switching the input source, Playing super audio cds or cds – Marantz SA8004 User Manual
Page 12
9
ENGLISH
9
Playback CDs
Playing Super Audio CDs or CDs
1
Press
<DISC/INPUT>
or
[DISC]
to change the input
source to “Disc”.
2
Insert a disc.
• Press 5 to open and close the disc tray.
• When you press 1 and close the Disc tray, “Toc Reading” is
displayed in the Display and then playback will start.
3
When playing back a super audio CD, press
[S.MODE]
, and select the layer that you want to play
back.
SA-CD
CD
4
Press 1.
The “1” display lights, and playback begins.
• When all of the tracks recorded on the disc have fi nished
playing back, playback stops automatically.
Stopping Playback
Press 2.
Stopping Playback temporarily
Press 3.
• The “3” indicator lights.
• To restart playback, press 1 or 3.
Fast-Forwarding and Fast-Reversing (Searching)
G
Using the buttons on the main unitH
The search is started by holding down
<8
/
6
>
,
<7
/
9
>
during playback.
The search speed can be changed by holding down
<8
/
6
>
,
<7
/
9
>
.
The search speed changes in 4 steps: 1 2 3 4 1.
4 is the fastest search speed.
G
Using the buttons on the remote controlH
The search is started by pressing
[6]
,
[7]
during playback.
The search speed can be changed by pressing
[6]
,
[7]
.
The search speed changes in 4 steps: 1 2 3 4 1.
4 is the fastest search speed.
Switching the input source
This unit supports the following playback functions in addition to disc
playback.
• Digital audio input signal playback
• USB memory device fi le playback from the USB port in the front
panel
• iPod fi le playback from the USB port in the front panel
• Computer fi le playback from the USB port in the rear panel
Before playing back fi les from a connected device, perform the
following operation to switch the input source.
Press
<DISC/INPUT>
or
[INPUT]
to select the input source.
Coaxial
USB
PC
Disc
Optical
<DISC/INPUT>only
[Selectable items]
USB
: Plays back fi les on the device connected to the USB
port (iPod/USB) on the front panel. (vpage 16,17)
PC
: Connect a computer to the USB port (DIGITAL IN) on
the rear panel, and use this unit as a D/A converter.
(vpage 19)
Coaxial : Connect a digital device to the COAXIAL port (DIGITAL
IN) on the rear panel, and use this unit as a D/A
converter. (vpage 19)
Optical : Connect a digital device to the OPTICAL port (DIGITAL
IN) on the rear panel, and use this unit as a D/A
converter. (vpage 19)
Disc
: Plays back the disc inside the disc tray. (vpage 9)
You can press
[DISC]
to switch the input source to “Disc”.
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
1
2
<7 / 9>
<DISC/INPUT>
<LEVEL>
5
3
<8 / 6>
DISPLAY OFF
indicator
DISC tray
[S.MODE]
[DISPLAY]
[TIME]
[INPUT]
[DISC]
[RANDOM]
[REPEAT]
3
1
2
[8, 9]
[NUMBER]
(0 – 9)
[6, 7]